SHOP

Holden V8 Billet Timing Cover

CNC-machined billet alloy timing cover to suit Holden V8 engines. Accepts standard water pumps and CVR-style electric pumps.

Price: $495.00
P&P: $15.00
Loading Updating cart...

Billet Single V-Pulley – Holden V8

CNC-machined billet alloy V-pulley to suit Holden V8 engines with single drive belt.

Price: $125.00
P&P: $10.00
Loading Updating cart...

RB-series Billet Alternator Bracket

CNC-machined billet alloy alternator bracket to suit all RB-series engines, including RB30 VL Commodore.

Price: $75.00
Price: $50.00
P&P: $10.00
Loading Updating cart...

Holden V8 Billet Rocker Cover – VN Heads

These CNC machined billet rocker covers are to suit Holden V8s fitted with VN-style EFI heads. They have clearance for larger rocker gear and a high-lift camshaft, and will clear the brake booster when fitted to Commodores.

Price: $800.00
P&P: $30.00
Loading Updating cart...

RB30 Billet Distributor Cap

This billet cap covers the distributor on Rb30 engines that have been fitted with multi-coil ignition systems.

Price: $120.00
P&P: $15.00
Loading Updating cart...

Billet Rocker Covers – LS engines

Fully CNC-machined billet LS rocker covers. These covers accept standard gaskets and have provisions for dash fittings at the front.

Price: $600.00
P&P: $0.00
Loading Updating cart...

Holden V8 Billet Rocker Cover – Early Heads

Billet rocker covers to suit early (pre VN) 308 heads. CNC machined.

Price: $800.00
P&P: $20.00
Loading Updating cart...

LS Billet Rocker Covers and Coil Brackets

Full CNC-machined billet LS rocker covers and coil relocation brackets to suit LS engines. Coils not included.

Price: $700.00
P&P: $30.00
Loading Updating cart...

Billet Valley Cover – LS1

If you run a aftermarket inlet manifold on your LS engine, our CNC-machined billet valley cover is the perfect replacement for the ugly factory item.

Price: $125.00
P&P: $15.00
Loading Updating cart...

Billet Coil Mounts – LS2 & LS3

These billet coil brackets are designed to bolt on top of our billet LS rocker covers, or you can use them to mount your coils anywhere you like.

They are designed for ls2, ls3 and l98 coils.

Price: $200.00
P&P: $15.00
Loading Updating cart...

Billet Power Steering Bracket – Holden V8

This billet power steering bracket suits Holden V8 and mounts on the driver's side. Comes in machine finish.

Price: $325.00
P&P: $20.00
Loading Updating cart...

Billet Alternator Bracket – Holden V8

This billet alternator bracket suits Holden V8 and mounts on the passenger side. It comes in machine finish and uses the factory adjustor.

Price: $225.00
P&P: $20.00
Loading Updating cart...

Alternator Bracket Holden V8

This billet alternator bracket suits Holden V8 and mounts down low on the driver's side.

It comes polished and includes stainless allen-head bolts and an adjustor.

Fits Toranas as well as Commodores.

Price: $200.00
P&P: $20.00
Loading Updating cart...

Billet Timing Cover – LS Engines

CNC-machined billet aluminium timing cover to suit LS-series engines.

Unlike factory timing covers, these billet covers have sufficient clearance for double row timing chains and do not require additional machining.

Price: from $495.00
P&P: $20.00
Loading Updating cart...

Billet Thermostat Housing – Ford Cleveland V8

Fully CNC-machined billet aluminium thermostat housing to suit Cleveland V8 engines. Machined to accept -16 AN radiator hose fitting.

Price: $250.00
P&P: $15.00
Loading Updating cart...

Budget Series Billet Rocker Covers – LS engines

These low-profile, fully CNC-machined billet LS rocker covers are designed for engines with a standard camshaft and rocker gear. They accept standard gaskets and can be configured for AN breather fittings at the front.

Price: $375.00
P&P: $30.00
Loading Updating cart...

LS ENGINE COOLANT CROSSOVER / STEAM PIPE

Sick of the ugly Crossover pipe in front of your manifold on your LS Engine?  Muscle Garage has the solution quick neat & simple,

 

Specially made CNC Billet adaptors with Speedflow fittings and alloy tubing

 

Price: $165.00
P&P: $25.00
Loading Updating cart...

Hi-Mount Alternator kit to suit LS1

Muscle Garage have designed this Hi Mount LS Alternator Conversion as a bolt up solution for tight engine bays or where a  single Turbo kit is interfering with the Alternator's location or with the Off Road 4x4 LS swapped cars wanting to get the alternator up higher.

 

This will only suit Cable type Throttle Bodies will not suit Fly by wire Tb's

Price: $425.00
P&P: $40.00
Loading Updating cart...

LS2 Billet Valley Plate

Billet valley plate for LS2 LS3. Has provision for "O" rings on underside

Price: $180.00
P&P: $25.00
Loading Updating cart...

CNC Billet Top suit Holley Hi Ram Manifold on LS Engine

CNC Billet top to suit the Holley HI & Mid Ram Manifolds

Designed to be used in conjuction with EFI 4 Barrel Throttle bodies, direct bolt on fitment, comes with mouting hardware

 

Price: from $800.00
P&P: $40.00
Loading Updating cart...

Billet Thermostat Housing Holden V8

Billet thermostat housing for Holden V8. To suit manifold with heater hose provision. Available in -16 or -20 an thread. Comes in machine finish

Price: from $150.00
P&P: $15.00
Loading Updating cart...

 

Brake Master Cylinder Reservoir Cover (oval)

CNC-machined billet alloy brake master cylinder reservoir cover to suit oval type master cylinders.

Price: $100.00
P&P: $10.00
Loading Updating cart...

Brake Master Cylinder Reservoir Cover (rectangle)

CNC-machined billet alloy brake master cylinder reservoir cover to suit rectangle type master cylinders.

Price: $100.00
P&P: $10.00
Loading Updating cart...

Billet Brake Master Cylinder Bracket

CNC-machined billet alloy brake master cylinder bracket to suit Commodore.

Price: $70.00
P&P: $10.00
Loading Updating cart...

Billet One-Piece Strut Tops – VB-VN Commodore

CNC-machined billet alloy one-piece strut tops to suit VB-VN Commodore. Comes supplied with stainless steel dome nuts. Available in in polished finish or powerder coated gloss black. Custom colours please email.

Price: from $135.00
P&P: $10.00
Loading Updating cart...

Billet Dipstick Handle – LS & Ecotec V6 engines

CNC-machined billet alloy dipstick handle to suit LS-series engines and Ecotec V6.

Price: $30.00
P&P: $10.00
Loading Updating cart...

Billet Strut Top Caps – VR-VE Commodore

CNC-machined billet alloy strut top caps to suit VR-VE Commodore with standard or adjustable strut tops.

Price: $145.00
P&P: $10.00
Loading Updating cart...

Billet Oil Cap Cover – Factory VN V8-style Rocker Covers

CNC-machined billet alloy engine oil cap cover to suit the factory oil filler cap on VN V8-style rocker covers.

Price: $50.00
Price: $40.00
P&P: $10.00
Loading Updating cart...

RB30 Billet Oil Cap

CNC-machined billet alloy engine oil cap to suit RB30 engines.

Price: $65.00
P&P: $10.00
Loading Updating cart...

VE V8 Billet Engine Cap Set

CNC-machined billet alloy caps for radiator, overflow tank, power steering, oil and brake master cylinder to suit VE Commodore V8. All caps are designed to push on over existing caps.

Price: $220.00
P&P: $10.00
Loading Updating cart...

LS Billet Engine Cap Set

CNC-machined billet alloy caps for power steering, oil, and radiator header tank to suit LS1 Commodores (VT-VX).

Price: $110.00
P&P: $10.00
Loading Updating cart...

Billet Brake Booster Check Valve (-6AN)

This billet brake booster check valve is supplied with a dash-6 AN fitting.

Additional DescriptionMore Details

billet one way valve for the brake booster with a dash 6 fitting. fits nearly all brake boosters.


Price: $60.00
P&P: $10.00
Loading Updating cart...

Headlight Bolt Caps – VB-VK Commodore

Set of four CNC-machined billet headlight bolt caps to suit VB-VK Commodore. Come supplied with O-ring seals.

Price: $60.00
P&P: $10.00
Loading Updating cart...

Billet Clutch Master Cylinder Cap – VE Commodore

CNC-machined alloy clutch master cylinder cap to suit manual VE Commodore.

Price: $40.00
P&P: $5.00
Loading Updating cart...

Billet Clutch Master Cylinder Cap – VT-VZ Commodore

This CNC-machined alloy clutch master cylinder cap cover fits over the original cap on manual VT-VZ Commodores.

Price: $40.00
P&P: $5.00
Loading Updating cart...

Billet Master Cylinder Bracket – VT-VY Commodore

This billet alloy master cylinder bracket suits VT-VY Commodores. It is fully CNC-machined and comes polished.

Price: $80.00
P&P: $10.00
Loading Updating cart...

Fibreglass Wiper Motor Cover – VB-VL Commodore

This fibreglass cover goes over the wiper motor area of VB-VL Commodores. It comes ready for priming and painting.

Price: $200.00
P&P: $30.00
Loading Updating cart...

Complete Billet Engine Bay Kit – VB-VN

Buy the set and save! This kit includes one-piece strut tops with dome nuts, a master cylinder bracket and master cylinder top, all CNC machined from billet alloy and can be polished or powder coated gloss black

Price: from $285.00
P&P: $30.00
Loading Updating cart...

Complete Billet Engine Bay Cap Kit – VE Commodore V8

Buy in a kit and save! All parts are CNC-machined billet alloy and polished. Kit includes a pair of strut top covers, radiator cap, radiator overflow cap, oil cap, power steering cap, window washer bottle cap, brake master cylinder cap and dipstick handle. All caps are covers which fit over original caps.

Price: $365.00
P&P: $20.00
Loading Updating cart...

Radiator Cap Cover – Fits Universal Large Radiator Cap

CNC-machined Billet cover which goes over your existing radiator cap. Some trimming to your cap is required to fit.

Price: $50.00
P&P: $5.00
Loading Updating cart...

Billet LH-LX Torana Chassis Bolt Cover Dress Caps

CNC-machined billet caps to cover the chassis bolts in the engine bay of LH-LX Toranas.

Price: $140.00
P&P: $15.00
Loading Updating cart...

Fibreglass Wiper Motor Cover – VN-VS Commodore

Price: $200.00
P&P: $30.00
Loading Updating cart...

Billet K-Frame Spacers – VB-VS Commodore

CNC machined billet aluminium K-frame spacers to suit VB-VS Commodores.

Useful for creating space in engine bays for turbo systems and engine conversions.

Supplied with longer K-frame bolts for fitment, may require use of longer steering shaft.

Price: $280.00
P&P: $20.00
Loading Updating cart...

WILWOOD MASTER CYLINDER BILLET ADAPTOR VB-VS COMMODORE

MUSCLE GARAGE created this bolt up adaptor so you can run a WILWOOD Master Cylinder in your Commodore with relative ease and Fantastic looks

Full CNC Billet adaptor & Adjustable Rod to suit Commodore

Brake Booster Delete:-  allows the Booster to be removed ideal for Competition use or Street duties,

Reduces engine bay clutter

comes with required hardware to install, easy to fit dirct bolt up fitment

 

Price: $160.00
P&P: $15.00
Loading Updating cart...

LS2 ENGINE COIL RELOCATION KIT

LS2 ENGINE COIL RELOCATION KIT, These are designed to hold a Bank of 4 LS Coils in a tight bunch ideal to bolt onto the rear of the Heads or in another location of your choic,

 

Made from durable Stainless Steel they come with Bolts, Nylock Nuts, Spun Alluminium Spacers

 

******Available in Black Powdercoat or Stainless Finish

 

******COILS NOT INCLUDED

Price: from $120.00
P&P: $15.00
Loading Updating cart...

LS1 ENGINE COIL RELOCATION KIT

LS1 ENGINE COIL RELOCATION KIT, These are designed to hold a Bank of 4 LS Coils in a tight bunch ideal to bolt onto the rear of the Heads or in another location of your choic,

 

Made from durable Stainless Steel they come with Stainless Bolts, Nylock Nuts, Spun Alluminium Spacers

 

******Available in Black Powdercoat or Stainless Finish

 

******COILS NOT INCLUDED

 

Price: from $120.00
P&P: $15.00
Loading Updating cart...

Billet Headlight Back covers VH-VK

Polished billet cover to go over the rubber boot on VH-VK headlights.

Price: $250.00
P&P: $20.00
Loading Updating cart...

Billet Heater Plate HQ-WB

Available in raw machine finish, Black anodised or machined with pocket pattern

This is a plate to block off the hole that is left in the firewall of your hq to wb style Holden when you remove the standard heater box/fan. Common for people that have an under dash aircon/heater set up or for guys that dont have any heater at all. This plate when fitted is very strong so perfect for hanging oil catch cans or ignitions off.

This plate is CNC machined out of 6061 alloy, it is machined all over front and back it is not just some cheap water/laser cut piece of material.

All bolts/ washers and nyloc nuts are included.

Price: from $260.00
P&P: $30.00
Loading Updating cart...

 

VB-VS Commodore (Holden V8)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to fit VB-VS Commodore models with Holden V8 engines, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

HQ-WB Holden, LH/LX Torana (Holden V8)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to fit HQ-WB Holden and LH/LX Torana  models with Holden V8 engines, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

HQ/WB Holden, LH/LX Torana (Chev V8)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to fit HQ/WB Holden and LH/LX Torana with big and small block Chev V8 engines, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

VB-VS Commodore (LS engine)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to assist with LS conversions in VB-VS Commodores, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

HK/T/G Holden (Chev V8)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to fit HK/HT/HG Holden with big and small block Chev engines, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

HQ-WB Holden, LC-LX Torana (LS engine)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to assist with LS conversions in HQ-WB Holdens and LC-LX Toranas, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

HK/HT/HG Holden (LS engine)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to assist with LS conversions in HK/T/G Holdens, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

VT-VZ Commodore (LS engine)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to fit VT-VZ Commodore models with LS-series engines, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

VL Commodore/RB-series engines

Tuff Mounts engine mounts to suit RB-Series engines (RB20, RB25, RB26 & RB30) - both N/A and turbo - mounted on a VL Commodore K-frame.

Made using 5mm steel, these Tuff Mounts will easily withstand the stresses of a 1200+hp engine.

Designed as a direct replacement for the standard rubber mounts.

Price: $330.00
P&P: $25.00
Loading Updating cart...

R32, R33 & R34 Nissan Skyline

 New from Tuff Mounts are these heavy duty, fully captive engine mounts to suit R32, R33 and R34 Nissan Skylines with RB series engines.

Designed to take a beating from big horsepower engines and ideal for drift and motorsport use, Tuff Mounts hold the engine firmly in place at all times, allowing greater transfer of all engine torque through the driveline.

R33 models require a hole to be drilled in the crossmember for fitment.

Price: $330.00
P&P: $25.00
Loading Updating cart...

VN-VS V6 billet engine mounts

CNC Billet Tuff Mounts to suit VN-VY V6 Commodores, straight forward fitment, designed to replace Standard Hydraulic oil Filled Rubber Mounts which are prone to failure,

Strong/sturdy construction

Captive, easy to change bushes

raw machined finish, easy to polish for a show like finish

Price: $350.00
P&P: $25.00
Loading Updating cart...

Lower Control Arm – VB-VS

Commdore lower Control Arms, these have been designed to stop the age old Problem of twisting due to loading up the rear tyres under hard acceleration,

Designed & made right here in SA, using OEM arms, Sandblasted, Zinc Primed, Powdercoated for Quality & Endurance.

Choose between a rubber bush for street use or a nolathane bush for race applications

 

Price: from $330.00
P&P: $60.00
Loading Updating cart...

SB/BB Chev into VB-VS commodore

TUFF MOUNTS to suit SB & BB CHEV into VB-VS Commodores

 

Designed to be abused, our new TUFF MOUNT to suit CHEV into Commodores will allow you to have all the confidence in using your engines power right to the limit, wether it be for a Burnout car, Drag Racing or even just your normal street car, TUFF MOUNTS will make your car better!

 

100% Australian Made, using only the best components, Powdercoated for durability, Chrome-moly Crushtubes, High Tensile Bolts

Price: $350.00
P&P: $25.00
Loading Updating cart...

TUFF MOUNTS suit Chev Small Block

Finall the product you hve been waiting for has Arrived, we have managed to build a mount to replace the standard Chevrolet Engine mount (Pt # A1128) original TUFF MOUNTS Design, Original TUFF MOUNTS Quality & Standard.

 

Will suit

 

CAMARO

NOVA

CHEVELLE

CORVETTE

IMPALA

HOTRODS

ROD SHOP FRONT END's

Loads of other fitments as well

 

Price: from $265.00
P&P: $25.00
Loading Updating cart...

Holden 6 cylinder engines

Designed as a bolt in replacement will suit models from EH through to the VK Commodores

 

100% captive, easy to replace Bushes, Easier to remove & replace engine

 

Finished in Black Powdercoat for Durability & Quality

 

Designed & Manufatued by MUSCLE GARAGE in South Australia, using only the bst Quality Materials & Products

 

Price: $350.00
P&P: $25.00
Loading Updating cart...

LS Engines to suit 6cyl K-frame VL COMMODORES

Designed as a straight bolt up fitment for all LS Based Engines into VL Commodores with a 6cyl K-frame, will handle more power than you can throw at them!

100% Captive, easy to replace bushes

Will suit Pacemaker extractors, Starter Relocaion kit is required

 

Designed & Manufactured by MUSCLE GARAGE in South Australia using only the best quality materials & Products

 

Price: from $265.00
P&P: $25.00
Loading Updating cart...

M21, Trimatic, TH350 & Powerglide

This transmission mount from Tuff Mounts is designed to fit M21 manual transmissions, and Trimatic, TH350 and Powerglide automatic transmissions.

Price: $185.00
P&P: $15.00
Loading Updating cart...

TH700 Auto

This transmission mount from Tuff Mounts is designed to fit TH700 automatic transmissions.

Price: $185.00
P&P: $15.00
Loading Updating cart...

Tuff Mounts Transmission Mount – TH400 Auto

This transmission mount from Tuff Mounts is designed to fit TH400 automatic transmissions.

Price: $185.00
P&P: $15.00
Loading Updating cart...

VT-VZ Commodore (Auto and Manual)

This transmission mount from Tuff Mounts is designed to fit both manual and automatic transmissions fitted to VT-VZ Commodores.

Price: $160.00
P&P: $15.00
Loading Updating cart...

VL Commodore/LS engine/T56/Powerglide

Gearbox crossmember to suit VL Commodore fitted with an LS-series engine and either a T56 manual transmission or Powerglide auto.

Ideal for use with a Tuff Mounts transmission mount.

Price: $225.00
P&P: $35.00
Loading Updating cart...

Billet IRS DIFF MOUNT to suit VR-VZ Commodore

-MUSCLE GARAGE HAS JUST FINISHED A NEW HEAVY DUTY


-REAR DIFF MOUNT FOR THE VR-VZ COMMODORE'S


-PRECISION MADE CNC BILLET ALLUMINIUM FOR STRENGTH 


-REPLACEABLE BUSHES

-RED & BLACK BUSHES AVAILABLE

-SUPER EASY INSTALLATION

-DIRECT BOLT UP FITMENT 

-COMES WITH NEW HI TENSILE BOLTS TO INSTALL


-100%SOUTH AUSTRALIAN DESIGNED & DEVELOPED

Price: $345.00
P&P: $25.00
Loading Updating cart...

VE COMMODORE CNC BILLET TRANSMISSION MOUNT

Tuff Mounts have now got your transmission mount in your VE Commodore under control

Full CNC Billet Transmisson mount to suit all the VE Manual & Auto Transmissions,

Direct bolt in fitment no modifications required

easy to replace bushes

show quality looks

Price: $255.00
P&P: $25.00
Loading Updating cart...

 

Stainless Steel Sill Covers – VB-VL Commodore

Stainless steel sill covers to suit Commodore. Comes in a set of four.

Price: $120.00
P&P: $20.00
Loading Updating cart...

Custom Billet Dash Fascia

CNC-machined billet alloy generic hot rod-style billet dash fascia. Please note this product is made to order and as such, a lead time of up to a month may apply.

Price: $180.00
P&P: $15.00
Loading Updating cart...

Chrome-Plated Door Strikers – VB-VL Commodore, HQ-WB Holden, LH-UC Torana

Set of four chrome-plated door strikers to suit VB-VL Commodore, HQ-WB Holden and LH-UC Torana.

Price: $80.00
P&P: $10.00
Loading Updating cart...

Billet Gauge Cluster – VB, VC & VH Commodore

This custom, CNC-machined alloy gauge cluster is made to bolt up to original mounting points on VB-VH Commodores, and is machined to accept two 3-3/8in gauges. Please note this product is made to order and as such, a lead time of up to a month may apply.

Price: $450.00
P&P: $30.00
Loading Updating cart...

Shifter Mounting Plate

Shifter mounting plate to suit VB-VL Commodores.

Allows for quick and easy installation of most of aftermarket shifters to your standard trans tunnel. Provides a flat surface that's easy to work with. Comes in a black zinc plate finish, ready to install.

Price: $60.00
P&P: $20.00
Loading Updating cart...

Shifter Drop Box to suit VB-VK Commodore

Shifter Drop Box, Ideal for getting your B&M or Similar shifter down below Console level to run either a factory console or just for that cleaner look

Easy to Install

Will suit most Aftermarket Auto Shifters, ideal for the B&M Pro RATCHET & Pro STICK

Quality STEEL construction.

Black powdercoated for durability & Looks

100% Aussie Made by Muscle Garage

Price: $175.00
P&P: $30.00
Loading Updating cart...

Shifter Drop Box to suit VL-VS Commodore

Shifter Drop Box, Ideal for getting your B&M or Similar shifter down below Console level to run either a factory console or just for that cleaner look

Easy to Install

Will suit most Aftermarket Auto Shifters, ideal for the B&M Pro RATCHET & Pro STICK

Quality STEEL construction.

Black powdercoated for durability & Looks

100% Aussie Made by Muscle Garage

 

Price: $195.00
P&P: $30.00
Loading Updating cart...

 

Lowe Fabrications Stubby Cooler

Keep your favorite drink cool while working on your pride and joy with a Lowe Fabrications stubby cooler. Printed in Australia with the Lowe Fabrications logo on one side and a killer blown Blue Meanie VK design on the other, our stubby coolers are top quality!

Price: $10.00
P&P: $5.00
Loading Updating cart...

Tuff Mounts Stubby Cooler

Tuff Mounts won't just keep your engine securely mounted, they'll keep your beer cold, too!

Price: $10.00
P&P: $5.00
Loading Updating cart...

Lowe Fabrications Bucket Hat

If, like Chubby, you're always wandering around a local car show, you know you'll need a good hat to keep the sun off. Printed in Australia, a Lowe Fabrications bucket hat is the choice of the sun-smart enthusiast!

Price: $25.00
P&P: $5.00
Loading Updating cart...

Laurie Starling Stickers

100% of the sale of these stickers goes towards the Starling family.

Price: $5.00
P&P: $2.00
Loading Updating cart...

Tru Blu Aussie T-shirt

Our latest T-shirt design is as Tru Blu as they come. Featuring an exclusive blown Blue Meanie/Australian flag design, our shirts are great quality and printed locally.

Price: from $30.00
P&P: $10.00
Loading Updating cart...

Tru Blu Aussie Hoodie

Our latest hoodie design is as Tru Blu as they come. Featuring an exclusive blown Blue Meanie/Australian flag design, our hoodies are great quality and printed locally.

Price: from $55.00
P&P: $10.00
Loading Updating cart...

Lowe Fabrications Black and White Logo T-Shirt

Top quality black cotton T-shirt, printed in Australia with the Lowe Fabrications logo.

Price: from $20.00
P&P: $10.00
Loading Updating cart...

 

Chrome-Plated Door Strikers – VB-VL Commodore, HQ-WB Holden, LH-UC Torana

Set of four chrome-plated door strikers to suit VB-VL Commodore, HQ-WB Holden and LH-UC Torana.

Price: $80.00
P&P: $10.00
Loading Updating cart...

Stainless Steel Dome Nuts

Stainless steel, M8 threaded dome nuts to suit strut tops on VB-VS Commodores. Supplied in sets of six.

Price: $15.00
P&P: $5.00
Loading Updating cart...

 

Alloy Oil Catch Can

Custom stainless steel oil catch can, supplied with two vertical dash fittings of your choice and filter. Choose which finish suits your application too.

75mm diameter and 200mm overall height.

Price: from $160.00
P&P: $15.00
Loading Updating cart...

Alloy Power Steering Reservoir – LS, V6

This alloy power steering reservoir is a direct replacement for the factory unit on LS engines, and is supplied with either barb fittings for easy OE replacement, or -AN fittings for that show car look when teamed with braided lines and anodised fittings.

Price: from $150.00
P&P: $15.00
Loading Updating cart...

Oil Catch Can VB-VL

This alloy catch can is designed to sit behind the headlight on vb/vc/vh/vk/vl commodores. It comes with 2x-an fittings of your choice and 1x-6an drain and has internal baffles. Comes polished and with a 38mm K&N filter. choose between raw, polished or powder coated satin black. Choose drivers or passenger side too.

Price: from $290.00
P&P: $30.00
Loading Updating cart...

Alloy Surge Tanks 1.5L, 2.5L or 4L

Manufactured alloy surge tanks. Available in raw or satin black. Choose hose tail barbs(5/16 inlet 1/2 inch outlets) or dash fittings(-6 inlet -8 outlet).

Three different sizes available too 1.5L, 2.5L or 4L.

Price: from $110.00
P&P: $30.00
Loading Updating cart...

 

Car Builders Sound Deadener

Car Builders Sound Deadener is a vibration (sound) dampening mat. The material consists of an anti-drum noise absorption layer, combined with an aluminium top layer forming a heat and acoustic barrier. Its pressure sensitive self-adhesive back conforms and fuses easily to sheet metal and other hard substrates. It has excellent performance for acoustic dampening under varying temperature ranges and is highly resistant to aging.

Butyl Mat is today’s lightweight alternative to traditional bitumen body dampening. Our Sound Deadener is best suited to restorers, repairers, vehicle builders and audio enthusiasts, who demand acoustic and heat insulation as bench marked by leading automotive manufacturers

Price: from $99.00
P&P: $15.00
Loading Updating cart...

Installation Kit

The essential kit when installing your Sound Deadener. The kit features:

1 x Utility Knife - Fold away quick change utility knife with 5 x double side blades making it easily cut sheets to size.

1 x Application roller - Featuring a 50mm wide semi urethane wheel, rolling on sealed bearings! Comfortable timber handle which doubles as a tapered end to work sound deadener sheets into corrugations in your floor pan.

1 x Roll of performance Foil Tape - 38mm wide x 10 meters in length the tape is 0.05mm thick and strong and robust to cover all joints and neatly complete the job

Price: $30.00
P&P: $10.00
Loading Updating cart...

Embossed Aluminium Heat Shield

Car Builders embossed aluminum heat shields are a universal material designed to manage and reduce radiant and conductive heat. Aluminum is the ideal choice of material as it offers a high corrosion resistance, high thermal conductivity, is highly reflectively and has a low emissive rate.

Our multilayer heat shield material is semi rigid and formablein construction. Designed to reduce temperatures up to 650 C, it can be
effectively used in various applications such as:
Engine compartments

Exhaust systems

Under carriages

Industrial application

Agricultural applications

Price: from $42.00
P&P: $15.00
Loading Updating cart...

Acoustic Liner Carpet Underlay

Car Builders Acoustic Liner is a multi-layer open and closed cell foam with a peel and stick backing. It offers a high level of acoustic and thermal insulation superior to that of traditional jute/sisal underlay. Pack comes with 2 sheets 1000x900mm or 1.8sqm. 2 packs recommended for a sedan.

Price: $59.00
P&P: $10.00
Loading Updating cart...

VB-VS Commodore (Holden V8)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to fit VB-VS Commodore models with Holden V8 engines, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

HQ-WB Holden, LH/LX Torana (Holden V8)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to fit HQ-WB Holden and LH/LX Torana  models with Holden V8 engines, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

HQ/WB Holden, LH/LX Torana (Chev V8)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to fit HQ/WB Holden and LH/LX Torana with big and small block Chev V8 engines, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

VB-VS Commodore (LS engine)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to assist with LS conversions in VB-VS Commodores, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

HK/T/G Holden (Chev V8)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to fit HK/HT/HG Holden with big and small block Chev engines, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

Stainless Steel Sill Covers – VB-VL Commodore

Stainless steel sill covers to suit Commodore. Comes in a set of four.

Price: $120.00
P&P: $20.00
Loading Updating cart...

Custom Billet Dash Fascia

CNC-machined billet alloy generic hot rod-style billet dash fascia. Please note this product is made to order and as such, a lead time of up to a month may apply.

Price: $180.00
P&P: $15.00
Loading Updating cart...

Alloy Oil Catch Can

Custom stainless steel oil catch can, supplied with two vertical dash fittings of your choice and filter. Choose which finish suits your application too.

75mm diameter and 200mm overall height.

Price: from $160.00
P&P: $15.00
Loading Updating cart...

Brake Master Cylinder Reservoir Cover (oval)

CNC-machined billet alloy brake master cylinder reservoir cover to suit oval type master cylinders.

Price: $100.00
P&P: $10.00
Loading Updating cart...

Brake Master Cylinder Reservoir Cover (rectangle)

CNC-machined billet alloy brake master cylinder reservoir cover to suit rectangle type master cylinders.

Price: $100.00
P&P: $10.00
Loading Updating cart...

Billet Brake Master Cylinder Bracket

CNC-machined billet alloy brake master cylinder bracket to suit Commodore.

Price: $70.00
P&P: $10.00
Loading Updating cart...

Billet One-Piece Strut Tops – VB-VN Commodore

CNC-machined billet alloy one-piece strut tops to suit VB-VN Commodore. Comes supplied with stainless steel dome nuts. Available in in polished finish or powerder coated gloss black. Custom colours please email.

Price: from $135.00
P&P: $10.00
Loading Updating cart...

Holden V8 Billet Timing Cover

CNC-machined billet alloy timing cover to suit Holden V8 engines. Accepts standard water pumps and CVR-style electric pumps.

Price: $495.00
P&P: $15.00
Loading Updating cart...

Billet Dipstick Handle – LS & Ecotec V6 engines

CNC-machined billet alloy dipstick handle to suit LS-series engines and Ecotec V6.

Price: $30.00
P&P: $10.00
Loading Updating cart...

Billet Single V-Pulley – Holden V8

CNC-machined billet alloy V-pulley to suit Holden V8 engines with single drive belt.

Price: $125.00
P&P: $10.00
Loading Updating cart...

Billet Strut Top Caps – VR-VE Commodore

CNC-machined billet alloy strut top caps to suit VR-VE Commodore with standard or adjustable strut tops.

Price: $145.00
P&P: $10.00
Loading Updating cart...

Billet Oil Cap Cover – Factory VN V8-style Rocker Covers

CNC-machined billet alloy engine oil cap cover to suit the factory oil filler cap on VN V8-style rocker covers.

Price: $50.00
Price: $40.00
P&P: $10.00
Loading Updating cart...

RB-series Billet Alternator Bracket

CNC-machined billet alloy alternator bracket to suit all RB-series engines, including RB30 VL Commodore.

Price: $75.00
Price: $50.00
P&P: $10.00
Loading Updating cart...

RB30 Billet Oil Cap

CNC-machined billet alloy engine oil cap to suit RB30 engines.

Price: $65.00
P&P: $10.00
Loading Updating cart...

VE V8 Billet Engine Cap Set

CNC-machined billet alloy caps for radiator, overflow tank, power steering, oil and brake master cylinder to suit VE Commodore V8. All caps are designed to push on over existing caps.

Price: $220.00
P&P: $10.00
Loading Updating cart...

LS Billet Engine Cap Set

CNC-machined billet alloy caps for power steering, oil, and radiator header tank to suit LS1 Commodores (VT-VX).

Price: $110.00
P&P: $10.00
Loading Updating cart...

Holden V8 Billet Rocker Cover – VN Heads

These CNC machined billet rocker covers are to suit Holden V8s fitted with VN-style EFI heads. They have clearance for larger rocker gear and a high-lift camshaft, and will clear the brake booster when fitted to Commodores.

Price: $800.00
P&P: $30.00
Loading Updating cart...

Billet Brake Booster Check Valve (-6AN)

This billet brake booster check valve is supplied with a dash-6 AN fitting.

Additional DescriptionMore Details

billet one way valve for the brake booster with a dash 6 fitting. fits nearly all brake boosters.


Price: $60.00
P&P: $10.00
Loading Updating cart...

Headlight Bolt Caps – VB-VK Commodore

Set of four CNC-machined billet headlight bolt caps to suit VB-VK Commodore. Come supplied with O-ring seals.

Price: $60.00
P&P: $10.00
Loading Updating cart...

Chrome-Plated Door Strikers – VB-VL Commodore, HQ-WB Holden, LH-UC Torana

Set of four chrome-plated door strikers to suit VB-VL Commodore, HQ-WB Holden and LH-UC Torana.

Price: $80.00
P&P: $10.00
Loading Updating cart...

Billet Clutch Master Cylinder Cap – VE Commodore

CNC-machined alloy clutch master cylinder cap to suit manual VE Commodore.

Price: $40.00
P&P: $5.00
Loading Updating cart...

Billet Clutch Master Cylinder Cap – VT-VZ Commodore

This CNC-machined alloy clutch master cylinder cap cover fits over the original cap on manual VT-VZ Commodores.

Price: $40.00
P&P: $5.00
Loading Updating cart...

Billet Gauge Cluster – VB, VC & VH Commodore

This custom, CNC-machined alloy gauge cluster is made to bolt up to original mounting points on VB-VH Commodores, and is machined to accept two 3-3/8in gauges. Please note this product is made to order and as such, a lead time of up to a month may apply.

Price: $450.00
P&P: $30.00
Loading Updating cart...

Stainless Steel Dome Nuts

Stainless steel, M8 threaded dome nuts to suit strut tops on VB-VS Commodores. Supplied in sets of six.

Price: $15.00
P&P: $5.00
Loading Updating cart...

Billet Master Cylinder Bracket – VT-VY Commodore

This billet alloy master cylinder bracket suits VT-VY Commodores. It is fully CNC-machined and comes polished.

Price: $80.00
P&P: $10.00
Loading Updating cart...

RB30 Billet Distributor Cap

This billet cap covers the distributor on Rb30 engines that have been fitted with multi-coil ignition systems.

Price: $120.00
P&P: $15.00
Loading Updating cart...

Fibreglass Wiper Motor Cover – VB-VL Commodore

This fibreglass cover goes over the wiper motor area of VB-VL Commodores. It comes ready for priming and painting.

Price: $200.00
P&P: $30.00
Loading Updating cart...

HQ-WB Holden, LC-LX Torana (LS engine)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to assist with LS conversions in HQ-WB Holdens and LC-LX Toranas, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

HK/HT/HG Holden (LS engine)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to assist with LS conversions in HK/T/G Holdens, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

VT-VZ Commodore (LS engine)

These heavy duty, fully captive engine mounts from Tuff Mounts are designed to fit VT-VZ Commodore models with LS-series engines, and are ideal for big horsepower applications.

Price: $350.00
P&P: $25.00
Loading Updating cart...

M21, Trimatic, TH350 & Powerglide

This transmission mount from Tuff Mounts is designed to fit M21 manual transmissions, and Trimatic, TH350 and Powerglide automatic transmissions.

Price: $185.00
P&P: $15.00
Loading Updating cart...

TH700 Auto

This transmission mount from Tuff Mounts is designed to fit TH700 automatic transmissions.

Price: $185.00
P&P: $15.00
Loading Updating cart...

Tuff Mounts Transmission Mount – TH400 Auto

This transmission mount from Tuff Mounts is designed to fit TH400 automatic transmissions.

Price: $185.00
P&P: $15.00
Loading Updating cart...

VT-VZ Commodore (Auto and Manual)

This transmission mount from Tuff Mounts is designed to fit both manual and automatic transmissions fitted to VT-VZ Commodores.

Price: $160.00
P&P: $15.00
Loading Updating cart...

Billet Rocker Covers – LS engines

Fully CNC-machined billet LS rocker covers. These covers accept standard gaskets and have provisions for dash fittings at the front.

Price: $600.00
P&P: $0.00
Loading Updating cart...

Holden V8 Billet Rocker Cover – Early Heads

Billet rocker covers to suit early (pre VN) 308 heads. CNC machined.

Price: $800.00
P&P: $20.00
Loading Updating cart...

Complete Billet Engine Bay Kit – VB-VN

Buy the set and save! This kit includes one-piece strut tops with dome nuts, a master cylinder bracket and master cylinder top, all CNC machined from billet alloy and can be polished or powder coated gloss black

Price: from $285.00
P&P: $30.00
Loading Updating cart...

Complete Billet Engine Bay Cap Kit – VE Commodore V8

Buy in a kit and save! All parts are CNC-machined billet alloy and polished. Kit includes a pair of strut top covers, radiator cap, radiator overflow cap, oil cap, power steering cap, window washer bottle cap, brake master cylinder cap and dipstick handle. All caps are covers which fit over original caps.

Price: $365.00
P&P: $20.00
Loading Updating cart...

VL Commodore/RB-series engines

Tuff Mounts engine mounts to suit RB-Series engines (RB20, RB25, RB26 & RB30) - both N/A and turbo - mounted on a VL Commodore K-frame.

Made using 5mm steel, these Tuff Mounts will easily withstand the stresses of a 1200+hp engine.

Designed as a direct replacement for the standard rubber mounts.

Price: $330.00
P&P: $25.00
Loading Updating cart...

Radiator Cap Cover – Fits Universal Large Radiator Cap

CNC-machined Billet cover which goes over your existing radiator cap. Some trimming to your cap is required to fit.

Price: $50.00
P&P: $5.00
Loading Updating cart...

LS Billet Rocker Covers and Coil Brackets

Full CNC-machined billet LS rocker covers and coil relocation brackets to suit LS engines. Coils not included.

Price: $700.00
P&P: $30.00
Loading Updating cart...

Lowe Fabrications Stubby Cooler

Keep your favorite drink cool while working on your pride and joy with a Lowe Fabrications stubby cooler. Printed in Australia with the Lowe Fabrications logo on one side and a killer blown Blue Meanie VK design on the other, our stubby coolers are top quality!

Price: $10.00
P&P: $5.00
Loading Updating cart...

Tuff Mounts Stubby Cooler

Tuff Mounts won't just keep your engine securely mounted, they'll keep your beer cold, too!

Price: $10.00
P&P: $5.00
Loading Updating cart...

Lowe Fabrications Bucket Hat

If, like Chubby, you're always wandering around a local car show, you know you'll need a good hat to keep the sun off. Printed in Australia, a Lowe Fabrications bucket hat is the choice of the sun-smart enthusiast!

Price: $25.00
P&P: $5.00
Loading Updating cart...

Billet Valley Cover – LS1

If you run a aftermarket inlet manifold on your LS engine, our CNC-machined billet valley cover is the perfect replacement for the ugly factory item.

Price: $125.00
P&P: $15.00
Loading Updating cart...

Alloy Power Steering Reservoir – LS, V6

This alloy power steering reservoir is a direct replacement for the factory unit on LS engines, and is supplied with either barb fittings for easy OE replacement, or -AN fittings for that show car look when teamed with braided lines and anodised fittings.

Price: from $150.00
P&P: $15.00
Loading Updating cart...

Billet Coil Mounts – LS2 & LS3

These billet coil brackets are designed to bolt on top of our billet LS rocker covers, or you can use them to mount your coils anywhere you like.

They are designed for ls2, ls3 and l98 coils.

Price: $200.00
P&P: $15.00
Loading Updating cart...

Billet Power Steering Bracket – Holden V8

This billet power steering bracket suits Holden V8 and mounts on the driver's side. Comes in machine finish.

Price: $325.00
P&P: $20.00
Loading Updating cart...

Billet Alternator Bracket – Holden V8

This billet alternator bracket suits Holden V8 and mounts on the passenger side. It comes in machine finish and uses the factory adjustor.

Price: $225.00
P&P: $20.00
Loading Updating cart...

Alternator Bracket Holden V8

This billet alternator bracket suits Holden V8 and mounts down low on the driver's side.

It comes polished and includes stainless allen-head bolts and an adjustor.

Fits Toranas as well as Commodores.

Price: $200.00
P&P: $20.00
Loading Updating cart...

R32, R33 & R34 Nissan Skyline

 New from Tuff Mounts are these heavy duty, fully captive engine mounts to suit R32, R33 and R34 Nissan Skylines with RB series engines.

Designed to take a beating from big horsepower engines and ideal for drift and motorsport use, Tuff Mounts hold the engine firmly in place at all times, allowing greater transfer of all engine torque through the driveline.

R33 models require a hole to be drilled in the crossmember for fitment.

Price: $330.00
P&P: $25.00
Loading Updating cart...

Shifter Mounting Plate

Shifter mounting plate to suit VB-VL Commodores.

Allows for quick and easy installation of most of aftermarket shifters to your standard trans tunnel. Provides a flat surface that's easy to work with. Comes in a black zinc plate finish, ready to install.

Price: $60.00
P&P: $20.00
Loading Updating cart...

VL Commodore/LS engine/T56/Powerglide

Gearbox crossmember to suit VL Commodore fitted with an LS-series engine and either a T56 manual transmission or Powerglide auto.

Ideal for use with a Tuff Mounts transmission mount.

Price: $225.00
P&P: $35.00
Loading Updating cart...

Billet LH-LX Torana Chassis Bolt Cover Dress Caps

CNC-machined billet caps to cover the chassis bolts in the engine bay of LH-LX Toranas.

Price: $140.00
P&P: $15.00
Loading Updating cart...

Laurie Starling Stickers

100% of the sale of these stickers goes towards the Starling family.

Price: $5.00
P&P: $2.00
Loading Updating cart...

Fibreglass Wiper Motor Cover – VN-VS Commodore

Price: $200.00
P&P: $30.00
Loading Updating cart...

Oil Catch Can VB-VL

This alloy catch can is designed to sit behind the headlight on vb/vc/vh/vk/vl commodores. It comes with 2x-an fittings of your choice and 1x-6an drain and has internal baffles. Comes polished and with a 38mm K&N filter. choose between raw, polished or powder coated satin black. Choose drivers or passenger side too.

Price: from $290.00
P&P: $30.00
Loading Updating cart...

VN-VS V6 billet engine mounts

CNC Billet Tuff Mounts to suit VN-VY V6 Commodores, straight forward fitment, designed to replace Standard Hydraulic oil Filled Rubber Mounts which are prone to failure,

Strong/sturdy construction

Captive, easy to change bushes

raw machined finish, easy to polish for a show like finish

Price: $350.00
P&P: $25.00
Loading Updating cart...

Lower Control Arm – VB-VS

Commdore lower Control Arms, these have been designed to stop the age old Problem of twisting due to loading up the rear tyres under hard acceleration,

Designed & made right here in SA, using OEM arms, Sandblasted, Zinc Primed, Powdercoated for Quality & Endurance.

Choose between a rubber bush for street use or a nolathane bush for race applications

 

Price: from $330.00
P&P: $60.00
Loading Updating cart...

SB/BB Chev into VB-VS commodore

TUFF MOUNTS to suit SB & BB CHEV into VB-VS Commodores

 

Designed to be abused, our new TUFF MOUNT to suit CHEV into Commodores will allow you to have all the confidence in using your engines power right to the limit, wether it be for a Burnout car, Drag Racing or even just your normal street car, TUFF MOUNTS will make your car better!

 

100% Australian Made, using only the best components, Powdercoated for durability, Chrome-moly Crushtubes, High Tensile Bolts

Price: $350.00
P&P: $25.00
Loading Updating cart...

Billet K-Frame Spacers – VB-VS Commodore

CNC machined billet aluminium K-frame spacers to suit VB-VS Commodores.

Useful for creating space in engine bays for turbo systems and engine conversions.

Supplied with longer K-frame bolts for fitment, may require use of longer steering shaft.

Price: $280.00
P&P: $20.00
Loading Updating cart...

Tru Blu Aussie T-shirt

Our latest T-shirt design is as Tru Blu as they come. Featuring an exclusive blown Blue Meanie/Australian flag design, our shirts are great quality and printed locally.

Price: from $30.00
P&P: $10.00
Loading Updating cart...

Car Builders Sound Deadener

Car Builders Sound Deadener is a vibration (sound) dampening mat. The material consists of an anti-drum noise absorption layer, combined with an aluminium top layer forming a heat and acoustic barrier. Its pressure sensitive self-adhesive back conforms and fuses easily to sheet metal and other hard substrates. It has excellent performance for acoustic dampening under varying temperature ranges and is highly resistant to aging.

Butyl Mat is today’s lightweight alternative to traditional bitumen body dampening. Our Sound Deadener is best suited to restorers, repairers, vehicle builders and audio enthusiasts, who demand acoustic and heat insulation as bench marked by leading automotive manufacturers

Price: from $99.00
P&P: $15.00
Loading Updating cart...

Installation Kit

The essential kit when installing your Sound Deadener. The kit features:

1 x Utility Knife - Fold away quick change utility knife with 5 x double side blades making it easily cut sheets to size.

1 x Application roller - Featuring a 50mm wide semi urethane wheel, rolling on sealed bearings! Comfortable timber handle which doubles as a tapered end to work sound deadener sheets into corrugations in your floor pan.

1 x Roll of performance Foil Tape - 38mm wide x 10 meters in length the tape is 0.05mm thick and strong and robust to cover all joints and neatly complete the job

Price: $30.00
P&P: $10.00
Loading Updating cart...

Embossed Aluminium Heat Shield

Car Builders embossed aluminum heat shields are a universal material designed to manage and reduce radiant and conductive heat. Aluminum is the ideal choice of material as it offers a high corrosion resistance, high thermal conductivity, is highly reflectively and has a low emissive rate.

Our multilayer heat shield material is semi rigid and formablein construction. Designed to reduce temperatures up to 650 C, it can be
effectively used in various applications such as:
Engine compartments

Exhaust systems

Under carriages

Industrial application

Agricultural applications

Price: from $42.00
P&P: $15.00
Loading Updating cart...

Tru Blu Aussie Hoodie

Our latest hoodie design is as Tru Blu as they come. Featuring an exclusive blown Blue Meanie/Australian flag design, our hoodies are great quality and printed locally.

Price: from $55.00
P&P: $10.00
Loading Updating cart...

Billet Timing Cover – LS Engines

CNC-machined billet aluminium timing cover to suit LS-series engines.

Unlike factory timing covers, these billet covers have sufficient clearance for double row timing chains and do not require additional machining.

Price: from $495.00
P&P: $20.00
Loading Updating cart...

Billet Thermostat Housing – Ford Cleveland V8

Fully CNC-machined billet aluminium thermostat housing to suit Cleveland V8 engines. Machined to accept -16 AN radiator hose fitting.

Price: $250.00
P&P: $15.00
Loading Updating cart...

Budget Series Billet Rocker Covers – LS engines

These low-profile, fully CNC-machined billet LS rocker covers are designed for engines with a standard camshaft and rocker gear. They accept standard gaskets and can be configured for AN breather fittings at the front.

Price: $375.00
P&P: $30.00
Loading Updating cart...

Lowe Fabrications Black and White Logo T-Shirt

Top quality black cotton T-shirt, printed in Australia with the Lowe Fabrications logo.

Price: from $20.00
P&P: $10.00
Loading Updating cart...

Acoustic Liner Carpet Underlay

Car Builders Acoustic Liner is a multi-layer open and closed cell foam with a peel and stick backing. It offers a high level of acoustic and thermal insulation superior to that of traditional jute/sisal underlay. Pack comes with 2 sheets 1000x900mm or 1.8sqm. 2 packs recommended for a sedan.

Price: $59.00
P&P: $10.00
Loading Updating cart...

Billet IRS DIFF MOUNT to suit VR-VZ Commodore

-MUSCLE GARAGE HAS JUST FINISHED A NEW HEAVY DUTY


-REAR DIFF MOUNT FOR THE VR-VZ COMMODORE'S


-PRECISION MADE CNC BILLET ALLUMINIUM FOR STRENGTH 


-REPLACEABLE BUSHES

-RED & BLACK BUSHES AVAILABLE

-SUPER EASY INSTALLATION

-DIRECT BOLT UP FITMENT 

-COMES WITH NEW HI TENSILE BOLTS TO INSTALL


-100%SOUTH AUSTRALIAN DESIGNED & DEVELOPED

Price: $345.00
P&P: $25.00
Loading Updating cart...

VE COMMODORE CNC BILLET TRANSMISSION MOUNT

Tuff Mounts have now got your transmission mount in your VE Commodore under control

Full CNC Billet Transmisson mount to suit all the VE Manual & Auto Transmissions,

Direct bolt in fitment no modifications required

easy to replace bushes

show quality looks

Price: $255.00
P&P: $25.00
Loading Updating cart...

LS ENGINE COOLANT CROSSOVER / STEAM PIPE

Sick of the ugly Crossover pipe in front of your manifold on your LS Engine?  Muscle Garage has the solution quick neat & simple,

 

Specially made CNC Billet adaptors with Speedflow fittings and alloy tubing

 

Price: $165.00
P&P: $25.00
Loading Updating cart...

Hi-Mount Alternator kit to suit LS1

Muscle Garage have designed this Hi Mount LS Alternator Conversion as a bolt up solution for tight engine bays or where a  single Turbo kit is interfering with the Alternator's location or with the Off Road 4x4 LS swapped cars wanting to get the alternator up higher.

 

This will only suit Cable type Throttle Bodies will not suit Fly by wire Tb's

Price: $425.00
P&P: $40.00
Loading Updating cart...

Shifter Drop Box to suit VB-VK Commodore

Shifter Drop Box, Ideal for getting your B&M or Similar shifter down below Console level to run either a factory console or just for that cleaner look

Easy to Install

Will suit most Aftermarket Auto Shifters, ideal for the B&M Pro RATCHET & Pro STICK

Quality STEEL construction.

Black powdercoated for durability & Looks

100% Aussie Made by Muscle Garage

Price: $175.00
P&P: $30.00
Loading Updating cart...

Shifter Drop Box to suit VL-VS Commodore

Shifter Drop Box, Ideal for getting your B&M or Similar shifter down below Console level to run either a factory console or just for that cleaner look

Easy to Install

Will suit most Aftermarket Auto Shifters, ideal for the B&M Pro RATCHET & Pro STICK

Quality STEEL construction.

Black powdercoated for durability & Looks

100% Aussie Made by Muscle Garage

 

Price: $195.00
P&P: $30.00
Loading Updating cart...

WILWOOD MASTER CYLINDER BILLET ADAPTOR VB-VS COMMODORE

MUSCLE GARAGE created this bolt up adaptor so you can run a WILWOOD Master Cylinder in your Commodore with relative ease and Fantastic looks

Full CNC Billet adaptor & Adjustable Rod to suit Commodore

Brake Booster Delete:-  allows the Booster to be removed ideal for Competition use or Street duties,

Reduces engine bay clutter

comes with required hardware to install, easy to fit dirct bolt up fitment

 

Price: $160.00
P&P: $15.00
Loading Updating cart...

TUFF MOUNTS suit Chev Small Block

Finall the product you hve been waiting for has Arrived, we have managed to build a mount to replace the standard Chevrolet Engine mount (Pt # A1128) original TUFF MOUNTS Design, Original TUFF MOUNTS Quality & Standard.

 

Will suit

 

CAMARO

NOVA

CHEVELLE

CORVETTE

IMPALA

HOTRODS

ROD SHOP FRONT END's

Loads of other fitments as well

 

Price: from $265.00
P&P: $25.00
Loading Updating cart...

LS2 Billet Valley Plate

Billet valley plate for LS2 LS3. Has provision for "O" rings on underside

Price: $180.00
P&P: $25.00
Loading Updating cart...

LS2 ENGINE COIL RELOCATION KIT

LS2 ENGINE COIL RELOCATION KIT, These are designed to hold a Bank of 4 LS Coils in a tight bunch ideal to bolt onto the rear of the Heads or in another location of your choic,

 

Made from durable Stainless Steel they come with Bolts, Nylock Nuts, Spun Alluminium Spacers

 

******Available in Black Powdercoat or Stainless Finish

 

******COILS NOT INCLUDED

Price: from $120.00
P&P: $15.00
Loading Updating cart...

LS1 ENGINE COIL RELOCATION KIT

LS1 ENGINE COIL RELOCATION KIT, These are designed to hold a Bank of 4 LS Coils in a tight bunch ideal to bolt onto the rear of the Heads or in another location of your choic,

 

Made from durable Stainless Steel they come with Stainless Bolts, Nylock Nuts, Spun Alluminium Spacers

 

******Available in Black Powdercoat or Stainless Finish

 

******COILS NOT INCLUDED

 

Price: from $120.00
P&P: $15.00
Loading Updating cart...

CNC Billet Top suit Holley Hi Ram Manifold on LS Engine

CNC Billet top to suit the Holley HI & Mid Ram Manifolds

Designed to be used in conjuction with EFI 4 Barrel Throttle bodies, direct bolt on fitment, comes with mouting hardware

 

Price: from $800.00
P&P: $40.00
Loading Updating cart...

Holden 6 cylinder engines

Designed as a bolt in replacement will suit models from EH through to the VK Commodores

 

100% captive, easy to replace Bushes, Easier to remove & replace engine

 

Finished in Black Powdercoat for Durability & Quality

 

Designed & Manufatued by MUSCLE GARAGE in South Australia, using only the bst Quality Materials & Products

 

Price: $350.00
P&P: $25.00
Loading Updating cart...

LS Engines to suit 6cyl K-frame VL COMMODORES

Designed as a straight bolt up fitment for all LS Based Engines into VL Commodores with a 6cyl K-frame, will handle more power than you can throw at them!

100% Captive, easy to replace bushes

Will suit Pacemaker extractors, Starter Relocaion kit is required

 

Designed & Manufactured by MUSCLE GARAGE in South Australia using only the best quality materials & Products

 

Price: from $265.00
P&P: $25.00
Loading Updating cart...

Billet Thermostat Housing Holden V8

Billet thermostat housing for Holden V8. To suit manifold with heater hose provision. Available in -16 or -20 an thread. Comes in machine finish

Price: from $150.00
P&P: $15.00
Loading Updating cart...

Billet Headlight Back covers VH-VK

Polished billet cover to go over the rubber boot on VH-VK headlights.

Price: $250.00
P&P: $20.00
Loading Updating cart...

Alloy Surge Tanks 1.5L, 2.5L or 4L

Manufactured alloy surge tanks. Available in raw or satin black. Choose hose tail barbs(5/16 inlet 1/2 inch outlets) or dash fittings(-6 inlet -8 outlet).

Three different sizes available too 1.5L, 2.5L or 4L.

Price: from $110.00
P&P: $30.00
Loading Updating cart...

Billet Heater Plate HQ-WB

Available in raw machine finish, Black anodised or machined with pocket pattern

This is a plate to block off the hole that is left in the firewall of your hq to wb style Holden when you remove the standard heater box/fan. Common for people that have an under dash aircon/heater set up or for guys that dont have any heater at all. This plate when fitted is very strong so perfect for hanging oil catch cans or ignitions off.

This plate is CNC machined out of 6061 alloy, it is machined all over front and back it is not just some cheap water/laser cut piece of material.

All bolts/ washers and nyloc nuts are included.

Price: from $260.00
P&P: $30.00
Loading Updating cart...